P314 Broadband Sharing Gateway with 4-Port Switch
3-6 Preface
Table 3-2 LAN TCP/IP Setup Menu Fields
Field Description Example
TCP/IP Setup
IP Address Enter the IP address of your Prestige in dotted decimal notation. 192.168.1.1
(default)
IP Subnet Mask Your Prestige will automatically calculate the subnet mask based
on the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the Prestige.
255.255.255.0
RIP Direction
Press the [SPACE BAR] to select the RIP direction from
Both/In
Only/Out Only/None.
Both
(default)
Version
Press the [SPACE BAR] to select the RIP version from
RIP-1/RIP-
2B/RIP-2M.
RIP-1
(default)
Multicast IGMP (Internet Group Multicast Protocol) is a session-layer
protocol used to establish membership in a Multicast group. The
Prestige supports both IGMP version 1 (
IGMP-v1
) and
IGMP-v2
.
Press the [SPACE BAR] to enable IP Multicasting or select
None
(default) to disable it.
None
When you have completed this menu, press [Enter] at the prompt [Press ENTER to Confirm…] to save
your configuration, or press [Esc] at any time to cancel.
3.3 Internet Access Setup
You will see two different Menu 4 screens depending on whether you chose
Ethernet
or
PPPoE
Encapsulation
.
3.3.1 Ethernet Encapsulation
You must choose the
Ethernet
option when the WAN port is used as a regular Ethernet. The PPPoE choice
is for a dial-up connection using PPPoE. If you choose
Ethernet
in
Menu 4
you will see the next screen.
