A SERVICE OF

logo

P314 Broadband Sharing Gateway with 4-Port Switch
6-4 SUA Server Setup
Figure 6-3 Menu 15
For more information on configuring supporting applications behind SUA refer to the
ZyNOS Support Note documentation on your Support Disc.
6.2.1 Configuring a Server behind SUA
Follow the steps below to configure a server behind SUA:
Step 1
Enter 15 in the Main Menu to go to
Menu 15 – Multiple Server Configuration.
Step 2
Enter the service port number in the
Port
#
field and the inside IP address of the server in the
IP
Address
field.
Step 3
Press [ENTER] at the “Press ENTER to confirm …” prompt to save your configuration after you
define all the servers or press
ESC
at any time to cancel.
The most often used port numbers are:
Menu 15 - Multiple Server Configuration
Port #
----
1
.
Default
2. 0
3. 0
4. 0
5. 0
6. 0
7. 0
8. 0
9. 0
10. 0
11. 0
12. 1026
IP Address
---------------
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
RR Reserved
Press ENTER to Confirm or ESC to Cancel: