P314 Broadband Sharing Gateway with 4-Port Switch
Filter Configuration 7-13
Once you have completed filling in
Menu 21.4.1.1 – Generic Filter Rule
, press [ENTER] at the message
[Press ENTER to Confirm] to save your configuration, or press [ESC] to cancel. This data will now be
displayed on
Menu 21.1.1 – Filter Rules Summary
.
7.3 Example Filter
Let’s look at the first rule in the third default ZyXEL filter set, TELNET_FTP_Web_WAN (see Figure 7-6)
as an example. Please see our PNC Disk for more example filters. This filter is designed to block outside
users telnetting into the Prestige.
Figure 7-10 Telnet Filter Example
Step 1.
Enter 21 from the Main Menu to open Menu 21 – Filter Set Configuration.
Step 2.
Enter the index of the filter set you wish to configure (in this case, 3) and press [ENTER]
.
Step 3.
Enter a descriptive name or comment in the Edit Comments field (in this case
TELNET_FTP_Web_WAN) and press [ENTER].
Step 4.
Press [ENTER] at the message: [Press ENTER to confirm] to open Menu 21.3.1 – Filter Rules
Summary.
Step 5.
Enter 1 to configure the first filter rule (the only filter rule of this set). Make the entries in this
menu as shown in the following figure.
