Filter
Top Products
Operating QUESTempº 44/46
View
10
Operating QUESTempº 44/46
Use the Up Arrow and Down Arrow keys to move the marker in the display in front
of the desired mode. Pressing the I/O Enter key will select the mode.
View
Displays the measured data but does not log it. If more than one set of sensors is
plugged into the unit, they can be displayed by pressing and releasing the I/O ENTER
key. The displayed sensor set is shown in the upper right corner.
Figure 1-6: Viewing measured data
NOTE: To return to the menu, hold down the I/ O ENTER key while a 3, 2, 1
countdown is shown in the lower right corner of the display. Then the menu
screen will appear (see Figure 1-3, page 4 for an example).
Setup
Allows changing temperature units, language, time, date, logging rate, selecting
between Heat Index and Humidex, turning air flow on or off, and setting stay time
parameters.
To Setup parameters do one of the following:
1. From the main menu, select Setup by pressing the I/O Enter key.
2. Use the Arrow keys to select an item (listed below).
• Temperature: Celsius, Fahrenheit.
• Language: English, Spanish, French, Italian, German.
• Time: 24 hour clock only.
• Date: Day-month-year format.
• Log Rate: 1, 2, 5, 10, 15, 30, 60 minutes.
• Heat Index (United States), Humidex (Canada)
• Flow: On (QTº46 only), Off with fixed rate. (0.3 m/s is the recommended
value for indoor applications and 2.0 m/s for outdoor applications)
WET 65.5º F 1
DRY 74.0º F
View mode
Indicates you are
viewing sensor one
data
Operating