Filter
Top Products
Operating QUESTempº 48N
Setup
9
Selecting Setup parameters
1. From the main menu, select Setup by pressing the I/O Enter key. Using
the Up/Down Arrow keys, select the settings in steps 2-6.
Figure 1-11: Selecting temperature setting and setup
2. For the Time and Date settings, once selected, press I/O Enter key to
move to the update field. (An underline will appear under the first field.)
Press Up/Down Arrows to change the number/month. Press I/O
Enter key to toggle through each field. Repeat as necessary until all
values are selected.
3. For the Temperature setting, either Fahrenheit or Celsius will appear.
Press the Up/Down Arrow to select and I/O Enter key to change.
Figure 1-12: Selecting temperature setting
4. For the Language setting, once selected, press I/O Enter key. To select a
language, press Up/Down Arrow keys. Once selected, press Run/Stop
key to return to setup parameters.
5. For the Log Rate, once selected, press I/O Enter key.
Repeatedly press I/O Enter keys to select either the Log Rate Event or
a Log Rate interval (for data logging; e.g. “5”).
Optional: changing Next Event field. Events are numbered starting
at 1 and incrementing. The number may be increased to simulate
skipping events. This may be useful if the events represent locations
and the starting location is somewhere other than 1.
Figure 1-13: Selecting log rate with event log
6. For the Index setting, once selected press I/O Enter key. Press
Up/Down Arrow keys to select: “---” (which is equivalent for no index),
ACGIH, PHEL, or Flag.
7. Exit Setup by pressing the Run/Stop key.
Next event number
*To increase, press up arrow key (used
to simulate skipping an event.)
Event
Example of setting Log Rate
to Event Log
Operating:
Setup
Temperature setting – press I/O Enter key
to switch between values.
Press I/O Enter key to select Setup.