Filter
Top Products
Getting Started
Turning on, logging/capture an event, and turning off
4
Turning on, logging/capture an event, and turning off
To quickly get you started with the QUESTempº 48N, the following section explains
turning on the instrument, data logging/event logging, and stopping.
1. Press the I/O Enter key to turn on.
The first two start-up screens detail the name, type of instrument, and then
a revision and battery power screen appears. (Ensure the battery level
does not fall below 6.4V or you will want to replace the battery. See
“Power options”, page 19 for more details.)
NOTE: if you have data saved on the instrument, an additional screen stating
“data in memory” will appear prompting you to reset the instrument, if desired.
Figure 1-3: Start-up screens (A – indicates model and type
B- indicates revision and battery power)
2. In the Index Start-Up screen, press I/O Enter key. (
NOTE: if an index is
selected from the Setup menu, this will appear on this screen.
)
Figure 1-4: Index start-up screen
3. A Log Rate Start-Up screen will appear, press I/O Enter key. (This screen
details your log rate time or event logging setup option and the last saved
logged session or event.) (See Setup, page 8 for more information on event
logging.)
Figure 1-5: Log rate start-up screen
A
B