Filter
Top Products
Y1-03-0211 Rev D 55
e) Sensor Settings
Within this service password protected menu the NAUTICAST offers the following
configuration options:
Set up data speed 4800/9600/38400 baud.
Monitor the connected sensor inputs for each sensor channel.
Verify and edit the Sensor Configuration on the display screen.
Analyze the information received from the connected sensor devices.
Produce an electronic installation report.
Configuration of various NMEA protocols.
Dynamic Keys: Sensor Settings
[M5]
[Save]
Save Data Input
[Up] /
[Down]
Select Data Field
for Configuration
[M6]
[Default]
Restor the default
settings
[Enter]
Select Data Field
for Configuration
[M7]
[Analyce]
Analye you NMEA
Data streem
[Left] /
[Right]
Configure Data
[M8]
[Back]
Return to Menu
Configuration
Use this menu to set up the data speed 4800/9600/38400 baud.
NOTE: This configuration should be done only by advanced users like installation
technicians. Therefore you will find more details in the installation manual.
During the configuration process, the NAUTICAST is not operational.
N 1
o
19' E 0
o
12' |1> N/A|2>0.00|3>0.10nm
*********** Sensor Settings ************
BaudRate Sensor1:< 4800> CRC: auto
Ignored:$HC---$-----$-----$-----
$-----$-----$-----$-----
1>Start Monitor>
BaudRate Sensor2: 4800 CRC: auto
Ignored:$HC---$-----$-----$-----
$-----$-----$-----$-----
2>Start Monitor>
BaudRate Sensor3: 38400 CRC: auto
Ignored:$HC---$-----$-----$-----
$-----$-----$-----$-----
3>Start Monitor>
----------------------------------------
| Save | Default | Analyze | Back