Filter
Top Products
Y1-03-0211 Rev D 4
1.3 Entering Ship Settings
. The default
password from the factory is mentioned on your AIS display at the protection foil. (see
Appendix 7.3 for password information). Enter Password and use the up and down arrows to
edit Ship Settings then press Enter or the numeric reference on the keypad to select and
edit.
Save after editing.
Main Menu Example:
Select Ship Settings and press M5 [Enter]. Enter User Password and Continue.
Ship Settings Menu Example:
Select and enter ATIS Code / Call Sign.
Select and enter Ship Name.
Select and enter Length of Convoy (in m).
Select and enter Beam of Convoy (in m).
Select and enter Internal and External GPS antenna positions.
Select and enter Length of Ship (in dm).
Select and enter Beam of Ship (in dm).
N 1
o
23' E 0
o
16' |1>0.01|2>1.30|3>1.80nm
|----------------------------------
| Menu
-----| |
| +- 1. Messages
View | +- 2. AIS Status
| +- 3. Voyage Settings
-----| +- 4. Ship Settings
| +- 5. Transponder Configuration
Msg. | +- 6. Service Configuration
| +- 7. Display Settings
-----| +- 8. Graphical Display Settings
|
Displ|
----------------------------------------
NUM|Select->| | |<-Back
N 1
o
19' E 0
o
12' |1>0.01|2>1.30|3>1.80nm
************ Ship Settings *************
Atis Code :max. 7ASCII +------+
ShipName :Nauticast(tm) Inland AIS
| |
Length(Conv):400m | A
Beam(Conv) :32m | |
RefPtExt :A380 B20 C8 D24m | x--|
RefPtInt :A380 B20 C8 D24m | | B
Length(ship):600dm | | |
Beam(ship) :220dm +-C-+D-+
----------------------------------------
| Save | | | Back