Filter
Top Products
Stainless Steel T ops and Boating Accessories t
C.E. Smith Company Greensboro, NC USA
Installation Instructions for
Model 52100 Stainless Steel Ttop
The
52100 Ttop provides a bolt together custom fit on virtually any
center console boat. Bolt together construction relieves the stresses from engine
vibration and wave shock that can crack 100% welded Ttops. Made from 316L
stainless steel, your
52100 Ttop will provide years of service with
minimum maintenance including occasional polishing and hosing off salt spray
after use. Your
Ttop is designed to provide shade to the boater
and to support optional accessories such as antennas, rod holders, a storage
bag or electronics box. It is very strong, but is not to be used as a pylon for
skiing, wake boarding or for towing. The
Ttop’s range of
adjustment allows it to fit over a wide variety of console sizes and shapes.
However, there are boats the
Ttop will fit that are not built strong
enough to support a Ttop. Such boats will require additional reinforcement to
the deck and or console above and beyond what is provided with this product or
discussed in these instructions. It is the responsibility of the purchaser to
determine when additional reinforcements are needed and to install these
reinforcements where needed for the Ttop installation to be strong and safe.
- 1 -