Filter
Top Products
25
Speed/Temperature Sensors
The FishEasy 240 family can accept as many as two temperature sensors,
which can be used to monitor the temperature of surface water, a live well
or some other location. These units can accept an optional speed sensor for
showing speed and distance traveled. However, you can only use one ac-
cessory at a time. If you would like to use a speed sensor and a tempera-
ture sensor at the same time, you will need a combination device.
NOTE:
The FishEasy 240 and FishEasy 240 Portable are packed with
transducers containing built-in temp sensors. If you want a speed
sensor or an additional temp sensor, see the Accessory Ordering In-
formation in the back of this manual.
If a second temp sensor is used, it must be the model TS-2U. This
model has a fixed electronic "address" which designates it as the second
of two temp sensors. Dual temperatures are displayed only on the Full
Chart page. The Large Digital page will display only the primary tem-
perature sensor.
Full Chart page showing dual temperature display.
Primary temp sensor
built into transducer
TS-2U secondary
external temp sensor
shown as T2