Filter
Top Products
69
Speed and Distance Log Units of Measure
The speed and distance log can be displayed in statute miles (MPH),
Nautical miles (knots), or Metric (kilometers per hour) if a speed sensor
is attached. To change the unit of measure, press
MENU DOWN until the
SYSTEM menu appears. Press UP ARROW, then press MENU until the
SPEED/LOG menu appears. Use the arrow keys to select the desired
measurement unit, then press
PWR to clear the menu.
Speed menu.
Reset Distance Log
You can reset the distance log to zero with this command. Press MENU
DOWN
until SYSTEM appears, then press UP ARROW. Press MENU until
the
RESET LOG menu appears. Press UP ARROW and the log returns to
zero. Press
PWR to clear the menu.