Filter
Top Products
57
out of reading the screen. Remember: Fish I.D. is one of the many tools
we provide so you can analyze your sonar returns for maximum fish
finding information. This and other features can help you successfully
"see" beneath the boat under varied water and fishing conditions. So,
practice with the unit in both the Fish I.D. mode and without to become
more familiar with the feature. The default for Fish I.D. is off.
Fish I.D. is most handy when you're in another part of the boat or per-
forming some task that prevents you from watching the sonar screen.
Then, you can turn on Fish I.D. and the audible fish alarm. When that
lunker swims under your boat, you'll hear it!
Fish I.D. can also be useful when you want to screen out some of the so-
nar detail gathered by your unit. For example, it can help cut through
the clutter of suspended bubbles caused by wave action or boat wakes.
To turn Fish I.D. on, press
MENU until the FISH ID menu appears. Press
UP ARROW to select ON, then press PWR. To turn it back off, repeat the
above steps, but press
DOWN ARROW to select OFF.
Fishtrack™
The FishTrack feature shows the depth of a fish symbol when it ap-
pears on the display. To turn it on, press
MENU until the FISH ID menu
appears. Press
UP ARROW to select TRACK ON, then press PWR. To turn it
off, repeat the above steps, but press
DOWN ARROW to select OFF. (If you
want to turn off FishTrack depths but leave Fish I.D. on, press
DOWN
ARROW
to select ON, then press PWR.) Remember, Fish I.D. must be on
in order to use the FishTrack feature.