Eagle Electronics 2T SONAR User Manual


 
44
To turn Fish I.D. on, press
MENU
until the
F
ISH
ID
menu appears. Press
UP ARROW
to select
O
N
, then press
PWR
.
To turn off the fish alarm without turning off fish symbols, press
MENU
DOWN
until
F
ISH
A
LARM
appears. Press
DOWN ARROW
to select
O
FF
, then
press
PWR
to clear the menu. Repeat the above steps to turn the alarm
back on, but press
UP ARROW
to select
O
N
before clearing the menu.
Fish Alarm menu.
Depth Alarms
The depth alarms are triggered only by the bottom signal. No other
echoes will activate these alarms. The depth alarms consist of a shallow
and a deep alarm. The shallow alarm sounds an alarm tone when the
bottom goes shallower than the alarm's setting. The deep alarm sounds
a tone when the bottom goes deeper than its setting. Both alarms ad-
just the same way, although through different menus.
Shallow Alarm
To set the shallow alarm depth, press
MENU DOWN
repeatedly until
S
HALLOW
A
LARM
appears.
Shallow Alarm menu.