Eagle Electronics 500C Fish Finder User Manual


 
133
2. Press to select route name|
ENT|ENT.
3. Upon arrival at your destination, cancel navigation:
press
MENU|MENU| to CANCEL NAVIGATION|ENT| to YES|ENT.
The following figures show what the Navigation Page and Map Page
look like while navigating a route.
Navigate a Route in Reverse
Here's how you run a route backward, from the end waypoint to the
beginning waypoint:
1. From the
NAVIGATION PAGE, press MENU|ENT or from the MAP PAGE,
press
MENU|MENU| to ROUTE PLANNING|ENT.
2. Press to select route name|
ENT| to REVERSE ROUTE|ENT| to
NAVIGATE ROUTE|ENT.
3. Upon arrival at your destination, cancel navigation:
press
MENU|MENU| to CANCEL NAVIGATION|ENT| to YES|ENT.
Navigating along a route: Fig. 1 shows the Navigation Page at the start
of a route, heading straight for the first waypoint (Wpt 1). In Fig. 2, the
traveler has arrived at Wpt 1; the arrival alarm has been triggered and
the bearing arrow on the compass rose has turned to point toward Wpt
2, off to the northeast.
Figure 2.
Figure 1.