Eagle Electronics 500C Fish Finder User Manual


 
137
Edit a Waypoint
Waypoint Name
To edit waypoint name:
1. Press
WPT| to MY WAYPOINTS|ENT|| to name|ENT|. Choose desired
waypoint from the list by using or to select first character then
press to choose the next character. After the desired waypoint is
highlighted in the list, press
ENT|ENT to access waypoint information
screen.
2. Use to select
EDIT WAYPOINT from the bottom menu, then press
ENT|ENT. Modify the name by pressing or and . Once the new
name is set press
ENT| EXIT|EXIT|EXIT|EXIT to return to the previ-
ous page display.
Waypoint Symbol
To edit waypoint symbol:
1. Press
WPT| to MY WAYPOINTS|ENT| to name|ENT. Select waypoint
from the list then press
ENT|ENT|. Use to select EDIT WAYPOINT from
bottom menu. Then press|
ENT| to ALTITUDE| to CHOOSE SYMBOL|ENT.
2. Use arrow keys to select desired symbol and press
ENT. To return to
the previous page, press
EXIT|EXIT|EXIT|EXIT.
Waypoint Position
To edit waypoint position:
1. Press
WPT| to MY WAYPOINTS|ENT| to name|ENT|. Then repeat
steps above to access waypoint information screen. Select
EDIT WAYPOINT,
press |ENT.
2. Latitude: press to
LATITUDE|ENT. Press or to change the first
character, then press to the next character and repeat until the lati-
tude is correct. Press
EXIT.
3. Longitude: press to
LONGITUDE|ENT. Press or to change the first
character, then press to the next character and repeat until the lon-
gitude is correct. Press
EXIT.
4. When latitude and longitude are correct, return to the previous page:
press
EXIT|EXIT|EXIT|EXIT.
Selecting a Waypoint
To select a waypoint on the map (for navigating to, for editing, etc.,) use
the arrow keys and center the cursor over the waypoint. A highlighted
halo will appear around the waypoint.