Eagle Electronics 500C Fish Finder User Manual


 
183
command is already highlighted.) The unit will show navigation in-
formation to the waypoint.
B. To find the waypoint, press to
FIND ON MAP|ENT. The Map
Page appears with the cursor highlighting the found waypoint.
Waypoint Information screens with the Go To Waypoint command se-
lected, left, and the Find on Map command selected, right.
To clear these menus and return to the previous page, press EXIT re-
peatedly.
5. If you're looking by name, there are two options: A. You can spell out
the name in the top selection box. Press or to change the first letter,
then press to move the cursor to the next letter and repeat until the
name is correct, then press
ENT|ENT. B. Or you can jump down to the
lower selection list by pressing
ENT, then press or to select a way-
point from the list, then press
ENT. The waypoint information screen
appears.