Eagle Electronics 320 Fish Finder User Manual


 
128
route by clicking on a map location with the cursor. Add Waypoint calls
up the Waypoint List so you can insert a waypoint from the list. Re-
move Waypoint will delete the waypoint from the route. View Waypoint
will show you where the selected waypoint is on the map.
Navigate a Route
1. From the
NAVIGATION PAGE, press MENU|ENT or from the MAP PAGE,
press
MENU|MENU| to ROUTE PLANNING|ENT.
Route Planning command on Main Menu, left; Routes menu, center;
Edit Route menu, right. Navigate command is selected in the Action box.
2. Press to select route name|ENT| to NAVIGATE|ENT|ENT.
3. Upon arrival at your destination, cancel navigation:
press
MENU|MENU| to CANCEL NAVIGATION|ENT| to YES|ENT.
The following figures show what the Navigation Page and Map Page
look like while navigating a route.
Navigate a Route in Reverse
Here's how you run a route backward, from the end waypoint to the
beginning waypoint:
1. From the
NAVIGATION PAGE, press MENU|ENT or from the MAP PAGE,
press
MENU|MENU| to ROUTE PLANNING|ENT.
2. Press to select route name|
ENT| to NAVIGATE| to RE-
VERSE
|ENT| to NAVIGATE|ENT.
3. Upon arrival at your destination, cancel navigation:
press
MENU|MENU| to CANCEL NAVIGATION|ENT| to YES|ENT.