Eagle Electronics 320 Fish Finder User Manual


 
158
2. Press to
SET LANGUAGE|ENT.
3. Use or to select a different language and press
ENT. All menus
now appear in the language you selected.
Set Local Time
Using the correct local time setting is handy when estimating local ar-
rival time while navigating. Also, the time and date are saved when a
waypoint is created.
To access the Set Local Time menu, you must first acquire your posi-
tion. Once that is done: press
MENU|MENU| to SYSTEM SETUP|ENT| to
SET LOCAL TIME|ENT.
Once in the Time Settings menu:
To set Local Time: Press ENT. Press or to change the first charac-
ter, then press to move the cursor to the next character. Repeat until
the time is correct, then press
ENT.
To set the Month: Press to
MONTH|ENT. Press or to select the
month, then press
ENT.
To set the Day: Press to
DAY|ENT. Press or to select the day,
then press
ENT.
To set the Year: Press to
YEAR|ENT. Press or to select the year,
then press
ENT.
The last field in this menu is
CONFIG DST. This feature allows your unit
to automatically adjust with the time change caused by Daylight Sav-
ing Time (you should only have to set it once). You may select which set
of rules matches DST in your region, or simply accept the default.
Once you have each field set the way you want, press
EXIT repeatedly
until you return to the previous page.
Show WAAS Alarm
When the signal is available, your unit will automatically use WAAS to
boost the accuracy of the position fix. When the WAAS signal is lost or
acquired, an alarm message appears. Since the U.S. government is still
developing the WAAS system, it's not unusual for a GPS/WAAS re-
ceiver to frequently lose and reacquire its lock on a WAAS satellite.
That can result in the alarm repeatedly going on and off. If you want,
you have the option of turning off the WAAS Acquired/Lost alarm with-
out affecting how the unit uses WAAS. Here's how:
1. Press
MENU|MENU| to GPS SETUP|ENT| to SHOW WAAS ALARM.
2. With the option highlighted, press
ENT to uncheck it (turn off) and