Eagle Electronics 320 Fish Finder User Manual


 
57
5. To turn off the alarm, press
MENU|MENU| to ALARMS|ENT| to
SONAR ALARMS|ENT|ENT|EXIT|EXIT|EXIT.
To switch to a different depth setting, open the Sonar Alarms menu and
repeat the instructions in step 3 above.
To adjust and turn on the deep alarm:
1. Press MENU|MENU| to ALARMS|ENT| to SONAR ALARMS|ENT.
2. Press to
DEEP ALARM ENABLED| to DEEP ALARM DEPTH|ENT.
3. Press or to change the first number, then press to move the
cursor to the next number and repeat until the depth is correct, then
press
ENT.
4. Press to
DEEP ALARM ENABLED|ENT|EXIT|EXIT|EXIT.
5. To turn off the alarm, press
MENU|MENU| to ALARMS|ENT| to
SONAR ALARMS|ENT| to DEEP ALARM ENABLED|ENT|EXIT|EXIT|EXIT.
To switch to a different depth setting, open the Sonar Alarms menu and
repeat the instructions in step 3 above.
Zone Alarm
The zone alarm is triggered when any echo passes inside the zone
alarm bar, shown on the right side of the screen.
To adjust and turn on the zone alarm:
1. Press MENU|MENU| to ALARMS|ENT| to SONAR ALARMS|ENT.
2. Press to
ZONE ALARM ENABLED| to ADJUST ZONE|ENT.
At left, Sonar Alarms menu, with Adjust Zone command selected.
At right, Adjust Zone Alarm selection box, with Upper selected.
3. To set the upper boundary for the Zone Alarm, use or to select
UPPER, then press or to move the top of the bar to the desired depth.
4. To set the lower boundary for the Zone Alarm, use or to select
LOWER, then press or to move the bottom of the bar to the desired depth.