Eagle Electronics 480 Fish Finder User Manual


 
180
Waypoint Information screens with the Go To Waypoint command se-
lected, left, and the Find on Map command selected, right.
To clear these menus and return to the previous page, press EXIT re-
peatedly.
5. If you're looking by name, there are two options: A. You can spell
out the name in the top selection box. Press or to change the first
letter, then press to move the cursor to the next letter and repeat
until the name is correct, then press
ENT|ENT. B. Or you can jump
down to the lower selection list by pressing
ENT, then press or to
select a waypoint from the list, then press
ENT. The waypoint informa-
tion screen appears.
Find By Name menu, left. Waypoint Information screen, center. At right,
the found waypoint is highlighted by the cursor on the Map Page.
A. To navigate to the waypoint, press ENT. (Go To Waypoint command
is already highlighted.) The unit will show navigation information to
the waypoint.
B. To find the waypoint, press to
FIND ON MAP|ENT. The Map Page
appears with the cursor highlighting the found waypoint.