Filter
Top Products
112
Find Waypoints
1. Press WPT|↑ to MY WAYPOINTS|ENT.
2. When searching for the nearest waypoint, press
ENT. If searching for
the waypoint by name, highlight
NAME then ENT. (To search by name,
jump to step 5.)
Find By Nearest command (left). Find by Name command (center).
List of the nearest waypoints (right).
3. When you are searching for the nearest waypoint, a list of waypoints
appears with the closest location highlighted at the top of the list and
the one furthest from you at the bottom of the list.
4. To see location information on the closest waypoint, press
ENT and the
Waypoint Information screen appears.
A. To navigate to the waypoint, press
ENT. The Go To Waypoint
command is already highlighted. The unit will show navigation in-
formation to the waypoint.
B. To find the waypoint, press ↓ to
FIND ON MAP|ENT. The Map Page
appears with the cursor highlighting the found waypoint.
To clear these menus and return to the previous page, press
EXIT re-
peatedly.
5. If you are looking by name, there are two options. You can spell out
the name in the top selection box. Press ↑ or ↓ to change the first letter,
then press → to move the cursor to the next letter and repeat until the
name is correct, then press
ENT|ENT. Or you can jump down to the
lower selection list by pressing
ENT, then press ↓ or ↑ to select a way-
point from the list, then press
ENT. The waypoint information screen
appears.