Filter
Top Products
15
However, a communications cable is not available for the unit at this time.
If you need to create a NMEA 0183 connection consult customer service.
Service contact information can be found in the back of this manual.
NMEA Wiring
To exchange NMEA data, the IntelliMap 640c has one NMEA 0183 ver-
sion 2.0 communication port. Com port one (Com-1) can be used to re-
ceive NMEA format GPS data. The com port can also transmit NMEA
format GPS data to another device.
A data cable should contain three wires. Com-1 uses the yellow wire to
transmit, the orange wire to receive and the shield wire for signal
ground.
Com-1 wiring to receive NMEA position information
from some other GPS receiver.
Com-1 wiring to transmit NMEA position information
to another NMEA-compatible device.
Mounting the Unit: Bracket, In-Dash or Portable
You can install the IntelliMap 640c on the top of a dash with the sup-
plied gimbal bracket. It can also be installed in the dash or mounted on
a portable power supply.
If you use the supplied bracket, you may be interested in an optional
R-A-M
bracket mounting system. This converts the unit's gimbal bracket
to a swivel mount, which can be used on the dash. R-A-M offers permanent
mounts and temporary mounts suitable for many vehicle types. See your
Eagle dealer or visit the LEI web site (www.lei-extras.com) for the latest
options; accessory ordering information is on the inside back cover of this
manual. For a complete look at the many mounting options, visit the RAM
web site at www.ram-mount.com.
Ground
To Other
Device
Orange (Receive) NMEA Transmit
Shield (Ground)
Ground
Com-1 to
IntelliMap 640c
To Other
GPS Receiver
Com-1 to
IntelliMap 640c
Yellow (Transmit)
NMEA Receive
Shield (Ground)