Filter
Top Products
23
Basic operation
Listening to the tuner
1 .
Press the [SOURCE] button repeatedly to
switch to the tuner mode.
This will turn the tuner on.
To turn the tuner off, press the [SOURCE] button either
shorter to select another mode or longer to turn the
power off.
2 .
Tap the [ BND ] button to switch to the
desired FM or AM bands.
[ ] button: Switch the FM band.
Pressing the button repeatedly switches the
FM band in the order of FM1
FM2 FM3.
[ ] button: Switch to the AM band.
3 .
Press the [ TU ] button to tune to a station.
A tap on either the [ ] or [ ] button for less than one
[ TU ] second will enable manual station tuning. Hold
one button down for more than two seconds to start the
automatic station search.
[ ] button: Starts searching toward higher frequencies.
[ ] button: Starts searching toward lower frequencies.
•If stations have been stored in memory, pressing a button
from [1] to [6] will directly select a station. (Refer to the
section “Manually setting stations into memory” on page
36.)