Filter
Top Products
25
Basic operation
3 .
Press the [SOURCE] button to switch to the
[CLOCK ON] display.
4 .
Press the [FUNC] button again.
Refer to the section on setting the clock to set
the time display.
Others
Disabling the guide tone feature (for button
operation)
The receiver is set at the factory to emit a beep tone in
response to button operation. The guide tone feature may
be disabled in the following procedure:
1 . Press the [FUNC] button for more than one second.
2. Press the [ BND ] button repeatedly until [BEEP
ON] display appears on the screen.
3. Press the [SOURCE] button to switch to the [BEEP
OFF] display.
4. Press the [FUNC] button again.
Contrast adjustment
Adjust the display contrast to the best level in accordance
with the angle of viewing.
1 . Press the [FUNC] button for more than one second.
2. Press the [ BND ] button repeatedly until [CONT]
display appears on the screen.
3. Press the [SOURCE] button to change contrast.
4. Press the [FUNC] button again.