Filter
Top Products
47
How to use an optional NOB remote control
How to use an optional NOB
remote control
Turning the power on/off
1 .
Press the [PWR] button.
The power turns on or off each time the button is pressed.
•When the main unit is shut down, the remote control will
not work.
Adjusting the audio volume
1 .
Press the [AUDIO CONTROL] button, and turn
it to the left or right.
Each tap of the button will switch the audio control
modes.
Turn to the right: Increases the volume.
Turn to the left : Decreases the volume.
Cutting the volume instantly (muting):
Press the [MUTE] button for more than two seconds to
cut the volume or restore it instantly.
•Press and hold the [MUTE] button for more than two
seconds if E-COM is connected and less than two
seconds if E-COM is not connected to activate or
cancel MUTE function.
[PWR] button
[MUTE] button
Remote-control
light receptor
[AUDIO
CONTROL]
button