Filter
Top Products
2-1
2. WIRING
2.1 Standard Wiring
All wiring are terminated at the rear of the display unit.
Signal cable
(to antenna unit)
CAUTION
Replace fuse to 7 A
when the ship's battery
is 24 VDC, and attach
a label to the fuse cover
on power cable.
The unit is shipped
with 15 A fuse.
Use of wrong fuse can
result in damage to the
equipment.
Power cable
connector
Connect power
cable here.
Ground terminal
Connect ground wire between
here and ship's ground.
Drain hole
(Allows moisture
to escape.)
Optional cable
(Remote display
and external monitor)
NavNet
equipment
(GD-1900C,
ETR-6/10N,
HUB etc.)
(6P)
DATA1
DATA2
GPS sensor
GPS-310B,
320B/NMEA
equipment
(7P)
Heading
sensor (6P)
(AD or
NMEA)
DATA3
NETWORK
Ext. buzzer/
PC (7P)
Ground the
equipment to
prevent
interference.
CAUTION
Display unit, rear view