3-2
3.2 NETWORK SETUP Menu
To communicate with other NavNet equipment, this setting should be done.
1. Open the INSTALL SETUP menu.
2. Press the NETWORK SETUP soft key.
▲
IP ADDRESS
172.031.003.002
HOST NAME
RADAR________
RADAR SOURCE
RADAR________
CHART SOURCE
______________
______________
______________
SOUNDER SOURCE
SOUNDER_____
SUBNET MASK
255.255.000.000
GATEWAY ADDRESS
000.000.000.000
OFFSET PORT NUMBER
10000
RETURN
NETWORK
SETUP
EDIT
NavNet SETUP menu
3. Select menu option and press the [ENTER] knob or EDIT soft key. For example, select
HOST NAME.
HOST NAME
R A D A R _ _ _
Host name window
4. Use the trackball or [ENTER] knob to select location and rotate the [ENTER] knob to set
character (or value).
5. Press the [ENTER] knob or ENTER soft key to finish.
6. Repeat steps 3-5 for other items.
7. Press the [MENU] key to finish.
8. Continue next setup.