Filter
Top Products
4-4
Connector Nut
5 pcs.
24P Connector Nut
(Large) 1 pc.
(Small) 4 pcs.
J106
SPU Board
Remove
connector cover.
Cable tie
Use this pan head
screw to fix the
ground wire of the
RGB output cable.
Rubber grommet
Cut a "X" in the
rubber grommet.
How to connect the RGB output cable
5. Attach the cable tie supplied as installation material to the position shown above, and
then tie the cable with it.
6. Reassemble the display unit. Fix the ground wire of the RGB output cable with the pan
head screw shown above.
7 Attach the rubber grommet to the hole at the rear of the display unit.