Filter
Top Products
3-3
Contents of Network setup menu
Item Description Default Setting
IP ADDRESS This address is assigned at the factory. Change
the address (last three digits; 001 to 254) when
like models are connected directly or through the
hub. Do this change before connecting the
equipment to the other equipment or hub to
distinguish. Do not set the same IP address in the
network.
172.031.003.002
HOST NAME Set the name for your display unit to distinguish it
from others in the NavNet system. Confirm that
two equipment don’t have same host names. The
host name has been preset depending on the
series of NavNet. See the table in below. This host
name is used for RADAR SOURCE and CHART
SOURCE.
RADAR
RADAR SOURCE Enter the host name “RADAR (preset)” or the new
name set at HOST NAME item setting if the unit
has been changed of the network radar to use for
the radar display.
RADAR
CHART SOURCE Enter a host name (set at HOST NAME) of
network display unit to select equipment which has
chart card in its slot (Max. three units, excluding
own) to use.
None
SOUNDER
SOURCE
The host name of the network sounder ETR-6/10N
is preset (SOUNDER) to use for the video sounder
display. Clear the host name when no network
sounder is connected.
SOUNDER
SUBNET MASK 255.255.000.000
GATEWAY
ADDRESS
000.000.000.000
OFFSET PORT
NUMBER
Not used. Reserved for future use.
10000
NavNet equipment default settings
Model IP ADDRESS HOST NAME
MODEL1722/1732/1742/1762 172.031.003.004 RADAR
MODEL1722C/1732C/1742C/1762C/1752C 172.031.003.001 RADAR
MODEL1833/1933/1943 172.031.003.002 RADAR
MODEL1833C/1933C/1943C/1953C 172.031.003.003 RADAR
GD-1700/1700C 172.031.014.001 PLOTTER
GD-1900C 172.031.003.003 PLOTTER