1-1
1. MOUNTING
1.1 Installation of Display Unit
The display unit can be installed on a tabletop, on the overhead or flush mounted in a
console or panel.
Tabletop, overhead mounting method
When selecting a mounting location for the display unit keep the following in mind:
•
Even though the display unit is waterproof, it is recommended that the display unit must
be mounted inside an enclosed cabinet.
•
Keep the display unit out of direct sunlight.
•
The temperature and humidity should be moderate and stable.
•
Locate the unit away from exhaust pipes and vents.
•
The mounting location should be well ventilated.
•
Mount the unit where shock and vibration are minimal. If the mounting location is subject
to heavy vibration, fix the display unit to the hanger perpendicular.
•
Keep the unit away electromagnetic field generating equipment such as motor, generator.
•
For maintenance and checking purposes, leave sufficient space at the sides and rear of
the unit and leave slack in cables.
•
A magnetic compass will be affected if the display units placed too close to the magnet
compass. Observe the following compass safe distances to prevent disturbance to the
magnetic compass; standard compass: 0.85 m, steering compass: 0.55 m.