Filter
Top Products
ii
CAUTION
Do not exceed 18 knots when operating
the equipment and do not exceed 16
knots when lowering or raising the
transducer.
The transducer may become damaged.
The zinc block attached near the
transducer must be replaced yearly.
The junction between the transducer and
main shaft may corrode, which can result
in loss of the transducer or water leakage
inside the ship.
Do not use the equipment for other than
its intended purpose.
Personal injury can result if the equipment
is used as a chair or stepping stool, for
example.
Do not place objects on the top of the
equipment.
The equipment can overheat or personal
injury can result if the object falls.
WARNING
To avoid electrical shock, do not
remove cover. No user-serviceable
parts inside.
TYPE 86-003-1011-0
CODE No. 100-236-230
TYPE 03-160-1042-0
CODE No. 100-302-750
DANGER
Electrical shock hazard.
Turn off power before
servicing.
WARNING LABEL
Warning labels are attached to the equipments. Do not remove the lables. If the labels
are missing or damages, contact a FURUNO agent or dealer about replacement.