Filter
Top Products
9-1
PORT/STARBOARD, HORIZONTAL SLICE
DISPLAYS
The port/starboard display or horizontal slice display may be
displayed by pressing the [HIST] key. The display shown de-
pends on the setting of “HIST DSP/GRPH” in the USER menu.
Port/Starboard display
The port/starboard display takes echoes along the bearing (port,
starboard) selected on the SYSTEM menu and displays them on
the lower 1/3 of the screen. If the bearing width is set to 90
degrees, for example, the CSH-23F/24F displays echoes in both
port and starboard directions. The picture is scrolled vertically
to downward.
Port/Starboard
Sampling Angle
Display
Sector
Picture Advance
Direction
Port Direction
Starboard
Direction
Port/starboard sampling angle can be set between 0 and
180 degrees. Setting sequence: SYSTEM menu, HIST
DISPLAY, PRT/STBD Sample.
Fixed at 6 degrees.
A
B
↓
↓
↓
B
- - -
- - -
- - -
- - -
Figure 9-1 Port/starboard display