Filter
Top Products
1. OPERATION
1-36
1.28.3 How to set custom setups
1. Press the MENU key to open the menu.
2. Use S or T to select [Custom 1 (2 or 3)] and press the ENTER key.
Custom menu
3. Set menu items.
Note: For easy set up, you can copy the settings of the [Echo] menu (to [Custom
1], [Custom 2], [Custom 3]). Select [Copy] and press the ENTER key. When the
copying is completed, the message "Complete" appears. To erase this message,
press any key.
4. Press the MENU key to close the menu.
[Display-Dynam-
ic]
[Narrow]: Erase weak echoes.
[Normal]: Normal use.
[Wide]: Display weaker echoes compared to [Narrow].
section 1.36
[Display-Curve]
[1]: Reduce weak echoes.
[2]: Normal use.
[3]: Display weaker echoes in stronger color compared to [1].
section 1.37
[Color Erase] 0 - 11 section 1.44.3
Menu item Available settings See section
[ENTER]: Enter
[MENU]: Exit
[CANCEL/HL OFF]: Back
Brill/Color
Display
Echo
Custom 1
Custom 2
Custom 3
Alarm
Target Trails
Tuning
Target
Others
Copy
Gain Mode
Manual Gain
Manual Sea
: 0
: Manual
: 0
: Manual
Auto Sea
: Advanced
Sea Mode
Rain Mode
Auto Rain
: Manual
: Moderate
Custom1 : On
Enable/Disable the custom settings