Filter
Top Products
3-1
3. ADJUSTMENTS AND CHECKS
3.1 Hull Unit Check
Do not transmit when the vessel is in dry dock.
How to enable transmission
The default transmission state is OFF. Enable transmission as shown in the procedure
below. NEVER transmit when the vessel is in dry dock, to prevent damage to the
transducer.
1. Turn on the power and press the MENU/ESC key to open the menu.
2. Use the trackball to select [Others] then push the left-click button.
3. Select [Initial Settings] then push the left-click button.
4. Select [Changeable] then push the left-click button.
Others Quit
Edit User Program...
ES Setting...
2D Map Disp Setting...
Erase Marks...
Wheel Setting...
Display Setting...
Alarm&Audio...
Register...
Record/Recall...
Initial Settings...
Menu Box Transp. : OFF
Monitor Setting...
Data Display...
Mark Display...
Mark Size...
Data Display...
Current Vec & Wind...
Net SONDE Shooting...
Net SONDE Setting...
Target Lock...
Auto Fish Mark...
Stabilization...
Test...
Initialization...
Initial Setting Quit