Filter
Top Products
SAFETY INSTRUCTIONS
ii
Observe the following compass safe
distances to prevent interference to a
magnetic compass:
CAUTION
WARNING
If a steel tank is installed on a wooden
or FRP vessel, take appropriate
measures to prevent electrolytic
corrosion.
Electrolytic corrosion can damage the
hull.
Be sure to power each unit with proper
voltage.
Connection of an improper power supply
can cause fire or damage the equipment.
Maximum speed while the transducer is
projected or being raised or lowered
is as below, to prevent damage to the
transducer.
Projected Raising/
Lowering
1200 mm stroke Max. 18 kn Max. 15 kn
1600 mm stroke Max. 15 kn Max. 12 kn
Ground the equipment to prevent
electrical shock and mutual
interference.
1.45 mProcessor Unit
Control Unit
FSV-8501
Standard
compass
Steering
compass
0.90 m
0.35 m 0.30 m
IF Unit
0.90 m 0.55m
Sub Control Unit
FSV-853
0.80 m 0.50 m
DANGER
ෂ
䇭
㒾
Keep fingers away
from gears.
Shaft may cause injury.
Keep away from
moving shaft.
䉩䊟䈮Ꮞㄟ䉁䉏䉎ᕟ䉏䈅䉍䇯
ਅേ䉲䊞䊐䊃䈮䉋䉍䇮䈔䈏
䉕䈜䉎ᕟ䉏䈅䉍䇯
Ⓙേਛ䈲ㄭ䈨䈎䈭䈇䈖䈫䇯
Name䋺 Warning Label
Type䋺 10-071-5313
Code No.䋺 100-291-160-10