Filter
Top Products
1. HOW TO INSTALL THE SYSTEM
1-10
2. Make holes for four self-tapping screws (M5x20).
3. Peel the tape from the F mount gasket then attach the gasket to the rear of the
control unit.
4. Connect a ground wire (1.25sq, local supply) between the ground terminal at the
bottom of the unit and ship’s ground.
5. Set the unit to the cutout and fasten it with four self-tapping screws (M5x20) and
wave washers.
6. Set cosmetic caps to fixing holes.
1.3.2 Sub Control Unit FSV-853 (option)
Desktop installation, with keyboard fixture
1. Fix the keyboard fixture to the bottom of the unit with the screws (M4x12) supplied.
2. Attach rubber feet (2 pcs.) to the bottom of the unit.
3. Fix the unit to the mounting location with self-tapping screws (local supply).
Desktop installation, no keyboard fixture
1. Drill four mounting holes of 5 mm diameter, referring to the outline drawing at the
back of this manual.
2. Fix the unit with four screws (M4) from under side of the desktop. (Supply the
screws locally. Be sure the screws are of a sufficient length for the thickness of
the desktop.)
Name Type Code No. Qty
Keyboard fixture 03-163-7821-1 100-306-291-10 1
Washer head screw M4x12 C2700W MBN12 000-163-192-10 6
Rubber foot M5x40 000-162-682-10 2
Keyboard fixture
Rubber feet