Furuno NAVpilot-720 Marine Instruments User Manual


 
1. INTRODUCTION
1-4
1.3 How to Adjust Brilliance, Contrast
1.3.1 NAVpilot-700
1. Short-push the POWER/BRILL key to show the screen for the adjustment of con-
trast and brilliance.
2. Operate the Course control knob to adjust the contrast. (Contrast can also be ad-
justed (cyclically) with the POWER/BRILL key.)
3. Operate the W or X key to adjust the brilliance.
4. Push the Course control knob to close the screen, or wait several seconds for
the screen to close automatically.
1.3.2 NAVpilot-711, NAVpilot-720
1. Long-push the TURN/MENU key to open the menu.
2. Rotate the Course control knob to select [CONTRAST/BRILLIANCE] then push
the knob. The screen for the adjustment of contrast and brilliance appears.
3. Operate the Course control knob to adjust the contrast.
4. Operate the W or X key to adjust the brilliance.
5. Push the Course control knob to close the screen, or wait several seconds for
the screen to close automatically.
MESSAGE
SENSOR IN USE
CONTRAST/BRILLIANCE
RUDDER DRIVE LEVEL*
SEA STATE: FULL-AUTO
*: Shown with Fantum Feedback
TM
.
PUSH MENU KEY TO RETURN
TO PREVIOUS MENU.