Furuno NAVpilot-720 Marine Instruments User Manual


 
FURUNO
NAVpilot-700/711/720
SP - 1 E7272S01D-M
SPECIFICATIONS OF AUTOPILOT
NAVpilot-700/711/720
1 CONTROL UNIT
1.1 Display Monochrome dot matrix LCD
1.2 Effective display area
FAP-7001 85.2 x 85.2 mm (160 x 160 dot)
FAP-7011/7021 85.2 x 43.6 mm (160 x 80 dot)
1.3 Backlight 8 steps
1.4 Contrast 16 steps
1.5 Useable set 6 sets
2 PROCESSOR UNIT
2.1 Rudder mode STBY, Auto, Dodge, Remote, Advanced auto*, Navigation*, Wind*,
FishHunter
TM
*
2.2 Weather mode AUTO, MANUAL-CALM/ MODERATE/ ROUGH
2.3 Rudder gain AUTO/1-20 (Manual)
2.4 Counter rudder AUTO/0-20 (Manual)
2.5 Trim gain AUTO/1-20 (Manual)
2.6 Course change speed 1-30 deg/s
2.7 Rudder angle settings 1-60 deg
2.8 Alarm Heading deviation, Cross-track error, Ship’s speed*, Depth*,
Water temperature*, Wind*, Watch, Log trip*
2.9 Motor/ Solenoid drive 25A continuous, 50A for 5 seconds
2.10 Clutch/ Bypass drive 3A
*: external data required
3 INTERFACE
3.1 Number of port
NMEA0183 2 ports
CAN bus 1 port
Relay contact output 2 ports, alarm and status, 30V max., 3A max.
Contact signal input 2 ports, event switch control
USB 1 port, for maintenance only
3.2 Data sentences NMEA 0183 Ver1.5/2.0/3.0
Input AAM, APB, BOD, BWC, BWR, DBT, DPT, GGA, GLL, GNS, HDG,
HDM, HDT, MTW, MWV, ROT, RMB, RMC, THS, TLL, VHW,
VTG, VWR, VWT, XTE, ZDA
Output DBT, DPT, GGA, GLL, GNS, HDG, HDM, HDT, MTW, MWV, RMB,
RMC, ROT, RSA, VHW, VTG, VWR, VWT, ZDA
3.3 CAN bus PGN (NMEA2000)
Input 059392/904,060928,061184,126208/464/720/992/996,