Filter
Top Products
3. OPERATION
3-2
3.2 Turning the Power On/Off
Use the power switch on the processor unit to turn the power to the display unit
on and off.
POWER
Switch
Processor unit
The display starts up with the last-used display. Below is the heading display.
Note 1: Turn on external equipment AFTER
the SC-60 is showing reliable
heading data, to prevent heading output error.
Note 2: The display flashes when backup heading data is being used.
3.3 Panel Illumination, Display Contrast
1. Press the [DIM] key.
DIMMER (1-8)
CONTRAST (0-63)
EXIT: [ENT]
4
45
Dialog box for adjustment of panel illumination, display contrast
2. Press ▲ or ▼ on the Omnipad to adjust panel illumination.
3. Press ◄ or ► on the Omnipad to adjust display contrast.
4. Press the [ENT] key.