19
Before you can use your media device as an input source you must first
connect the device to the FUSION stereo as described in the
installation section.
To listen to audio from your iPod, MTP device, Bluetooth device or USB
FLASH drive:
ANDROID (MTP) SUPPORT: MTP is a standard developed for connecting media (music) devices over
USB. It has been adopted on a number of platforms including Android. FUSION currently supports a
range of smartphones utilising MTP.
Refer to www.fusionelectronics.com for the latest list of support devices.
PLAYING MUSIC CONTENT
MS-IP700i
iPod
• PresstheiPodkey.TheiPodinputsourcescreenis
displayed. The most recently selected track starts
playing at the current play point.
• ToappearontheiPodsourcescreentheiPod
may be inserted either into the internal dock or
an external UNI-Dock or connected to the external
USB connector.
MS-AV700i,
MS-IP700i
Auxiliary
• PresstheAuxiliarykey.Keeppressingthekeyuntil
theiPod(MS-AV700ionly),USB,BluetoothorMTP
source screen is displayed.
4. Press any key to exit
Turning scan mode on
Scanmodeallowsthe700SeriestoscanthroughpresetVHFchannels,
looking for active channels.
Note: If the Squelch level is adjusted so that you can hear a constant hissing sound, the
unit will not scan correctly. To correct this, see “Minimizing background noise”, above.
To turn scan mode on:
1. Press the Menu key.
2. TurntheEncodertohighlighttheScan menu item.
3. PresstheEncodertoselectthecheckbox( ).Scanmodeisturnedonandthe
menu exits automatically.
Note: Pressing the Play / Pause, Forward or Rewind key turns scan mode off.