Fusionbrands MS-IP700i Marine Instruments User Manual


  Open as PDF
of 68
 
39
To enter the name for the selected Zone:
a. Select the Name menu item. The current Zone name is displayed with
the first character highlighted.
b. Ifrequired,presstheForward(orBackward)keytohighlightthe
character you wish to change.
c. TurntheEncodertodisplaytherequiredvalueforthehighlighted
character.
d. PresstheEncodertoacceptthedisplayedvalueandmovetothenext
character.
e. RepeatStepsb–duntilyouhaveworkedthroughallthecharactersyou
wish to change.
f. PressandholddowntheEncodertosavethechangesandexit.
PREPARING FOR iPod, MTP DEVICE
OR USB CONNECTION
This section describes how to prepare for iPod, MTP device and USB input for
the MS-IP700i, MS-AV700i and MS-AV700 models.
When using your music device with either model:
• Always disconnect your device from the stereo when not in use and do not
leave in your vessel. This helps reduce risk of theft or damage as vessel cabins
can reach extreme temperatures.
• Do not remove the music device or use your stereo in a distracting manner
while operating the vessel. Check and obey all marine laws in association with use.
ANDROID (MTP) SUPPORT: MTP is a standard developed for connecting media (music) devices over
USB. It has been adopted on a number of platforms including Android. FUSION currently supports a
range of smartphones utilising MTP.
Refer to www.fusionelectronics.com for the latest list of support devices.
 previous next