Filter
Top Products
58
Problem Solution
WirelessRemoteAppforiPadandiPhone
My FUSION-
Link Wireless
application
displays “No
stereo available”
The first thing to check is that you are connected to the correct
wireless network for the 700 Series.Once you have confirmed this
close the App on the device and restart it (consult the manufacturers
websiteforinstructionsonrestarting).Ifthisfailscheckthatyouhave
a valid IP address on the 700 Series and follow the instructions in the
below tech support item
My FUSION-Link
Wireless remote
aplication wil not
connect to my 700
Series stereo
The first thing to check is that the 700 Series is displaying a valid IP
address on the about screen. Select the settings menu then about to
confirm. If the display is “ IPNone “ the router is either not a compatible
DHCPproductornotconguredcorrectly.IftheIPaddressstarts
with the prefix 169. it is not valid, this is a default address when the
routerisnotsendingaDHCPgeneratedIPaddressoriscongured
incorrectly.PleasereviewtheRouter’sinstructionmanualorcontact
the manufacturers website for technical help.
Problem Solution
MTP Device
Why has my MTP
device become
unresponsive?
FUSION recommends that folders contain no more than 300 files each.
Exceedingthislimitationmaycausethephonetobecomeunresponsive
and the FUSION Stereo to reset the USB link to the phone.
Note: Different operating systems and phones provide varying levels of
support for MTP. Please refer to www.fusionelectronics.com for device
compatibility information.
Why can’t the
FUSION stereo find
my music files?
Music files must be located in a folder using one of the following names.
The folder must be located in the root directory of your device.
My Music
My_Music
mobile
Music