Fusionbrands MS-IP700i Marine Instruments User Manual


  Open as PDF
of 68
 
55
Problem Solution
SiriusXM
When I press
the tuner source
button the
SiriusXM screen is
not displayed.
EnsureyouhavetheMS700iTunerregionsetto‘USA’.PressMenu>
Settings>Tunerregion>andselect‘USA’.
Ensurethesourceisenabled.Select;Settings>Sources>Accessorythen
select the source to enable SiriusXM.
•EnsuretheSiriusXMmoduleispluggedintotheMS700i.
•UnplugtheSiriusXMmoduleandcheckthepinsintheSiriusXM
plug are not damaged.
SiriusXM message:
‘Check Tuner’
• EnsuretheSiriusXMmoduleispluggedintotheMS700i.
• EnsuretheSiriusXMcablehasnotbeendamaged.
SiriusXM message:
‘Check Antenna’
• EnsuretheantennaispluggedintotheSiriusXMTunermodule.
• Ensuretheantennaisnotdamaged.
• Ensuretheantennacablehasnotbeendamaged
SiriusXM message:
‘No Signal’.
• Ensuretheantennaisnotdamaged.
• Ensuretheantennahasaclearviewoftheskyandisnotobscured.
• Ensuretheantennacablehasnotbeendamaged
What is the best
way to prevent
corrosion on
my 700 Series
chrome finish?
As with all products exposed to the harsh marine environment, a little
care will help to preserve the finish. FUSION recommends that you clean
any salt water and/or salt residue from the front panel with a damp
cloth soaked in fresh water.
APPENDICES
TROUBLESHOOTING
Problem Solution
General
The unit does not
respond to key
presses.
• ResettheunitbypressingtheResetbuttoninsidethecontrolpaneldoor.
SiriusXM message:
‘Channel xx Not
Available’
A SiriusXM message informing you that the current channel is unavailable.
Possible causes are SiriusXM has removed the channel or your SiriusXM
subscription has changed.
• ContactSiriusXMtoupdateyoursubscription.
• Online:Gotowww.siriusxm.com/subscriptions
• Phone:Call1-866-635-2349
 previous next