Filter
Top Products
15
Unit Operation
Setup Menu/Chart
Setup Menu
The Setup Menu contains the unit settings that should not require
frequent change. The Setup Menu is divided into eight tabs: Chart, Tools,
Numbers, Alarms, System, Calibrations, Units, and Memory . Each tab will
be described in more detail in this section.
To enter and exit the Setup Menu, press the SETUP button on the face
of the unit. The first time that the SETUP button is pressed, the Setup
Menu will be displayed with the ‘Chart’ tab highlighted in black. Pressing
the UP or DOWN arrow will move the highlight between the tab selections.
Press the RIGHT arrow to access the selection fields. Each time the Setup
Menu is accessed, the unit will return to the last edited selection field. Press
the LEFT arrow key to get back to the tabs.
Chart
The ‘Chart’ tab allows the user to determine the appearance of the
scrolling chart display. To access the ‘Chart’ tab place the highlight over
it using the arrow keys.
Fish Symbols
‘Fish Symbols’ allows the user to determine how the chart will display
underwater targets and background information. If ‘Fish Symbols’ are
set to ‘OFF’, the unit will display all of the available information about
the underwater environment. If a fish symbol is selected, the chart will
display only the information related to that symbol.
To select a Fish Symbol:
1. Highlight the ‘Chart’ tab on the Setup Menu.
2. Highlight the ‘Fish Symbol’ selection fi eld and press ENTER.
3. Using the UP or DOWN arrow select the desired symbol and press ENTER.
Fish Symbols
— All available information will be displayed.
— Suspended targets will display as symbols. In this mode
background information will still be displayed making
fi sh identifi cation easier.
— Same as above with target depth displayed.
— Suspended targets displayed as symbols. No background
information will be displayed in this mode.
— Same as above with target depth displayed.
FF 160 update.indd 10/19/00, 2:18 PM15