Filter
Top Products
26
Unit Operation
Setup Menu/Units
Units
The ‘Units’ tab contains settings for ‘Depth’, ‘Temperature’ and ‘Speed’.
To access the ‘Units’ tab, use the arrow keys to highlight it.
Depth
The ‘Depth’ fi eld can be confi gured to display in Feet (ft), Meters (mt)
or Fathoms (fa).
To Select a Depth Unit:
1. Highlight the ‘Units’ tab on the Setup Menu.
2. Highlight the ‘Depth’ fi eld and press ENTER.
3. Select ‘Feet’, ‘Meters’, or ‘Fathoms’, press ENTER to accept the new
setting.
Temperature
If equipped with a temperature capable transducer, the unit can display
water temperature in Fahrenheit (°F) or Celsius (°C).
To Select a Temperature Unit,
1. Highlight the ‘Units’ tab on the Setup Menu.
2. Highlight the ‘Temperature’ fi eld and press ENTER.
3. Select ‘Fahrenheit’ or ‘Celsius’ press ENTER to accept the new setting.
Speed
If equipped with a speed capable transducer, the unit can display the
boat’s ‘Speed’ Over Water. The unit can be confi gured to display in ‘Nautical
Miles-Per-Hour’ (kt), ‘Kilometers-Per-Hour’ (kh), or ‘Miles-Per-Hour’ (mh).
To Select a Speed Unit:
1. Highlight the ‘Units’ tab on the Setup Menu.
2. Highlight the ‘Speed’ fi eld and press ENTER.
3. Select ‘Miles’, ‘Kilometers’, or ‘Knots’, press ENTER to accept the
Depth Selections
Speed Selections
Temperature Selections
FF 160 update.indd 10/19/00, 2:18 PM26