Filter
Top Products
17
Unit Operation
Setup Menu/Chart
Scale
The depth ‘Scale’ is displayed vertically along the right side of the
chart. The depth ‘Scale’ can be configured to display four different ways:
as an ‘Overlay’, in the ‘Corners’, with ‘Basic’ or ‘No Scale’.
To Change the Scale Setting:
1. Highlight the ‘Chart’ tab on the Setup Menu.
2. Highlight the ‘Scale’ selection fi eld and press ENTER.
3. Choose ‘Overlay’, ‘Corners’, ‘Basic’ or ‘No Scale’, press ENTER to
accept the selection.
Scale —
Overlay
Scale —
Corners
Scale —
Basic
Scale —
No Scale
FF 160 update.indd 10/19/00, 2:18 PM17