Filter
Top Products
Accessories
309524N 27
Cable Clamp Kit 246303 Installation
1. Slide cable clamp (3) onto cable (2).
2. Place washer (F) on fitting (E).
3. Push conical-shaped packing (D) into fitting (E).
4. Place washer (C) on retaining nut (B).
5. Screw retaining nut (B) into fitting (E). Tighten with
no more than 2 in. (50 mm) stripped black and blue
wires and 4 in. (100 mm) yellow/green ground wire
inside terminal junction box.
6. Place one side of retaining clip onto retaining clip
nut, and insert as shown.
F
IG. 19: Cable Clamp Kit
05544
3
2
Ref.
No. Part No. Description Qty
2 Cable, 16.4 ft. (5 m), 221° F
(105° C)
1
3 113162 Clamp 1
F
IG. 20: Kit Assembly
A
B
C
D
E
F
05554
Key:
A Retaining clip
B Retaining nut
CWasher
D Packing
EFitting
FWasher