Graco SDP15 Marine Instruments User Manual


 
Setup Mode Screens
14 312865R
Main Setup Screen (FIG. 12)
All Meters
The Main Setup Screen is the first screen displayed
when you enter the Setup Mode. This screen displays a
list of the available Setup Screens and also includes a
link back to the Home Screen.
Manual Meters Screens:
UNITS/LIMIT
•CALIBRATE
BANNER
LANGUAGE
•HOME
Preset Meters include all the Manual Meter’s Setup
Screens and also a PRESET screen.
UNITS/LIMIT
•CALIBRATE
PRESET
BANNER
LANGUAGE
•HOME
Displaying Setup Screen from an Operation
Mode Screen
1. Hold down the RIGHT ARROW (a) only, for a few
seconds (F
IG. 11).
2. Then at the same time, also press the center,
ENTER button (b) (F
IG. 11). Hold both buttons down
until the Main Setup Screen shown in F
IG. 12 dis-
plays.
Main Screen Features (F
IG. 12)
A. Screen Identifier Icon: Wrench icon displays in the
upper right corner when user is on the Main Screen of
the Setup screens.
B. Setup Screens: Screens available to user.
1. Use UP or DOWN ARROWS to select a screen
from the list.
2. Press center, ENTER button to confirm selection.
Selected screen displays.
1. Software Version Number: Reference number. You
may be asked to provide this number when contacting
Graco for technical support.
F
IG. 11
(a)
(b)
ti11824a
FIG. 12
UNITS/LIMIT
CALIBRATE
PRESET
BANNER
LANGUAGE
HOME
1.23.45
Manual Meters
Preset Meters
B
A
UNITS/LIMIT
CALIBRATE
BANNER
LANGUAGE
HOME
1.23.45
B
A
ti12177a
ti12186a
1
1