Filter
Top Products
SKU 93880 For technical questions, please call 1-800-444-3353 PAGE 5
3. Maintain a safe environment. Keep the area well lit. Make sure there is
adequate surrounding space. Always keep the area free of obstructions, grease,
oil, trash, and other debris. Do not use an electrically powered product in areas
near flammable chemicals, dusts, and vapors.
4. Never leave the Pipe Threader unattended when it is plugged into an
electrical outlet. Turn off the Pipe Threader and unplug the tool before leaving.
5. Carefully inspect the condition of the Pipe Threader before use, and check
the tool continually during use. If any damage is noted, stop immediately
and repair or replace the Pipe Threader.
6. Avoid electrical shock. Make sure the Pipe Threader is unplugged from
its electrical outlet prior to performing any inspection, maintenance, or
cleaning procedures. Do not use the Pipe Threader in the rain or in wet
conditions.
7. Use the right product for the job. There are certain applications for which this
product was designed. Do not use small tools, equipment, or accessories to do
the work of larger industrial tools, equipment, or accessories. Do not use this
product for a purpose for which it was not intended.
8. Do not allow children or other unauthorized people to handle or play with
this product.
9. Industrial applications must follow OSHA requirements.
10. Always secure the pipe being threaded with the Pipe Clamp assembly (56,
57, 58). See Figure G on page 10.
11. WARNING! People with pacemakers should consult their physician(s)
before using this product. Operation of electrical equipment in close proximity to
a heart pacemaker could cause interference or failure of the pacemaker.
12. WARNING! The warnings and cautions discussed in this manual cannot
cover all possible conditions and situations that may occur. It must be understood
by the operator that common sense and caution are factors which cannot be built
into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS