Filter
Top Products
28. Pull the lines all the way back to the rear hatch and tie a simple
knot approximately 4” from the end of the lines.
29. Now you are going to lock the small lines with loops at the end coming from the rudder to the
knots that you just tied. To do this, follow the diagram below to form a cinch around the line up to the
knot. Make sure that you know what line is the up and which is the down line coming from the
rudder. To do this pull on the rudder lines to see what one start to pull the rudder up. The line
that makes the rudder go UP should be attached to the line running along the left side of the
kayak.
The system should look like the diagrams below.
Pulley
T Handle
Rudder Line and
Larger Line Connection
Webbing
Small Tubing